AC Maintenance in Midwest City: How We Fixed a Bloated Capacitor and Restored Cooling

When an air conditioner suddenly stops cooling, one of the most common culprits is a failed capacitor. This small but crucial part gives your AC motors the boost they need to start and run. When a failed capacitor occurs, your system can blow warm air or stop running altogether.

Why Do Capacitors Fail?

Capacitors are filled with oil that helps them function. In Oklahoma’s extreme summer heat, the oil can overheat and expand, causing the capacitor to swell and fail. Other common causes of capacitor failure include:

• ⚡ The compressor overdrawing amps
• 🌫️ Dirty condenser coils making the system work harder
• 🔌 Electrical problems with the contactor or other components

Once a capacitor becomes bloated, the AC won’t cool properly until the part is replaced. That’s a common scenario when dealing with a failed capacitor.

Our Midwest City Service Call

We were called to a rental property in Midwest City, OK, where the tenant reported that their AC was only blowing warm air. After inspecting the system, we found:

• A bloated dual capacitor in the outdoor condenser.
• A very dirty condenser coil, reducing cooling efficiency.
• A charred contactor and a blower capacitor that was out of range, both of which need attention soon.

What We Did to Fix the AC

✅ Replaced the failed capacitor to get the system running again. This was crucial since it involved a failed capacitor in Midwest City, Oklahoma.
✅ Performed a full AC maintenance, including washing the condenser coil and clearing the drain line.
✅ Checked all electrical components and documented repairs needed for the fall.

The landlord also decided to sign up for our Heritage Plan for just $25/month, which provides regular HVAC maintenance in Midwest City and priority service for repairs. It’s an easy way to prevent unexpected breakdowns and keep tenants comfortable all year long.

Why AC Maintenance in Midwest City Matters

Regular AC maintenance is the best way to catch small issues before they turn into expensive repairs. A capacitor is an inexpensive part to replace, but when it fails, like the failed capacitor in Midwest City, Oklahoma, it can put stress on the compressor—a repair that can cost thousands of dollars.

Scheduling yearly clean and checks with Yarbrough & Sons ensures your system stays efficient, safe, and reliable during Oklahoma’s toughest heat.

HVAC Average Price Range by Tonnage:

• 1.5 Ton: $8,000 – $16,000
• 2 Ton: $8,000 – $16,000
• 2.5 Ton: $8,500 – $18,000
• 3 Ton: $9,000 – $18,500
• 3.5 Ton: $9,500 – $21,000
• 4 Ton: $10,500 – $21,500
• 5 Ton: $11,500 – $23,000

🔧 View your estimate instantly
💸 Financing options available

About Yarbrough & Sons Heating, Cooling & Plumbing

Serving Oklahoma City and surrounding areas since 1988, Yarbrough & Sons provides expert AC maintenance, repair, and replacement in Midwest City, OK. Our team is committed to quality service and keeping your home comfortable all year long.

Locations:
122 S Main Ave, Blanchard, OK 73010
3601 S Broadway #300, Edmond, OK 73013
📞 (405) 485-3470 | 🌐 yarbroughandsons.com